BT-L221 Battery For SHARP VL-DC3E/VL-DX10 Camcorder
SHARP VL-DC3E Camcorder Battery -
BT-L221 Li-ion 7.40V 2500mAh Battery For Use With The
SHARP VL-DC3E/VL-DX10/VL-H860U/VL-H870 Camcorder.Brand New SHARP VL-DC3E Battery ,Low Price, Secure Payment,1 Year Warranty!
Discount 25%!
1 Year Warranty! 30 Days Money Back
Your Price:
•
Product Detail •
Replace Code •
Fit Model •
Battery Tips
VL-DC3E Battery For SHARP Camcorder
- Cell Type : Li-ion
- Volts : 7.40V
- Capacity : 2500mAh
- Color : Black
- Dimension : 53.40x39.50x42.50mm
- Net Weight : 146.00g
- Brand : SHARP Camcorder Battery
- Condition : Brand New SHARP VL-DC3E Battery
- High capacity, rechargeable Li-ion battery with premium cell.
- Best replacement for the original SHARP BT-L221 battery pack.
- No memory effect. Chargeable even if it has not been used up yet.
Description
VL-DC3E Battery Fits The Following Battery Code:
Helios:
HS-C441 ,
SHARP:
BT-L221 , BT-L221U , BT-L241 , BT-L441 ,
SHARP VL-DC3E Camcorder Battery Fit Models:
SHARP: SHARP
VL-AH30U Battery ,
SHARP
VL-DC3E Battery ,
SHARP
VL-DX10 Battery ,
SHARP
VL-H860 Battery ,
SHARP
VL-H860U Battery ,
SHARP
VL-H870 Battery ,
SHARP
VL-H870U Battery ,
SHARP
VL-H875 Battery ,
SHARP
VL-H875U Battery ,
SHARP
VL-H880 Battery ,
SHARP
VL-H880U Battery ,
SHARP
VL-H890U Battery ,
SHARP
VL-H996 Battery ,
SHARP
VL-PD3H Battery ,
SHARP
VL-RD1E Battery ,
SHARP
VL-RD1H Battery ,
SHARP
VL-SD20U Battery ,
Your Deivce is powered by a rechargeable sharp camcorder battery.The full performance of a new vl-dc3e battery is achieved only after two or three complete charge and discharge cycles.The battery for sharp vl-dc3e camcorder can be charged and discharged hundreds of times,but it will eventually wear out.When the standby times are noticeably shorter than normal,replace the vl-dc3e battery pack.
If a replacement vl-dc3e battery is being used for the first time or if the VL-DC3E Camcorder Batteries VL-DX10 Camcorder Battery VL-H860 Camcorder Battery has not been used for a prolonged period.it may be necessary to connect the charger and then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use.Do not leave fully charged the battery connected to a charger,since overcharging may shorten its lifetime.If left unused,a fully charged sharp vl-dc3e battery will lose its charge over time.
