Sharp BT-H11 Battery|Ni-MH Battery for BT-H11*UK

Sharp BT-H11 Camcorder Battery - Our Sharp BT-H11 battery helps you capture those special moments. 3.60V 4000mAh Ni-MH Hi-Quality battery meets or exceeds original manufacturer specifications for Sharp BT-H11 camcorder batteries. The Sharp BT-H11 battery comes equip with a built-in smart circuitry that protects your battery and camcorder from input/output over-current, input/output over-voltage, and over-temperature. Our Sharp BT-H11 camcorder battery is your best choice.

Works with:
Sharp BT-H11
Battery Type:
Ni-MH
Voltage:
3.60V
Capacity:
4000mAh
Color:
Black
Dimension:
71.50x56.00x19.00mm
Net Weight:
175.00g

Condition: Brand New Sharp BT-H11 battery
Sharp BT-H11 with highest quality Ni-MH cells, it provides longer battery power.
No "memory effect" of this rechargeable BT-H11 battery, chargeable even if it has not been used up yet.
100% original manufacturer compatible.

Sharp BT-H11 Compatible Battery Codes :

Sharp:
BT-H11, BT-H11U, VSH006M11, VSH007M08,

Sharp BT-H11 Battery Fits Models :

Sharp:
Sharp Vl-8, Sharp Vl-8888,

your Sharp battery is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.

1. A new Sharp BT-H11 battery usually maintains a discharged condition with very low capacity. It is highly recommended to fully charge new battery packs before using. You can refer to the users' guide of your electronic device for charging instructions.
2. A new battery pack for BT-H11 needs to be circled (fully discharged and recharged) three to five times to reach its optimum performance.
3. Rechargeable battery will undergo self-discharging when left unused for a long period of time. Thus, it should always be stored in a fully charged state and kept in a cool, dry and clean place.
4. To maintain the optimum performance of Sharp BT-H11 battery pack, it is highly recommended to circle (fully discharging and recharging) it at least once a month.
5. It is normal if new Sharp BT-H11 battery gets warm when being charged or used. However, please pay special attention if the battery pack becomes excessively hot. This may indicate there is a problem with the charging circuit of the electronic device. Please consult a qualified technician if necessary.
6. New Sharp BT-H11 batteries are hard to be charged. Sometimes, your electronic device may indicate a fully charged condition about 10 to 15 minutes when the new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for about 10 to 15 minutes then repeat the charging procedure. Sometimes, a new battery will suddenly refuse to be charged. If this happens, a suggested solution is trying to remove the battery from the device and insert it again.

Sharp BT-H11 Camcorder Battery - Ni-MH 3.60V 4000mAh

Sharp BT-H11 Compatible Battery Codes :

Sharp BT-H11 Battery Fits Models :