BP-711 Battery For CANON A-10/A-2 Camcorder

A-10 Battery Fits The Following Battery Code:

Aztec:
AZ6010 ,
CANON:
BP-711 , BP-714 , BP-726 , BP-729 , BP-818 , BP-E718 , BP-E722 , BP-E722D , BP-E729 , BP-E77 , BP-E77(K) , BP-E77K , BP-E77KE , BP-E818 , VCN018 ,

Empire:
BNH-118-2.1 , BNH-118-3 , EPP-132 ,

Energizer:
CM-1060 ,

Hama:
46376 , 46377 , CP-376 , CP-377 ,

Helios:
HS-C1060 ,

JBRO:
TP-E722 , TP-E77 ,

JC:
Penney 932-0318 , Penney 932-2819 , Penney 934-0340 ,

Maxell:
M6010 , M6055 ,

Rayovac:
RV6077 ,

Saft:
RC6010 ,

Sunpak:
RB-E77MF , SV-8 , SV-9 ,

Varta:
V219 ,

Vivanco:
BP-2460 ,

Zenith:
VAC-902 , VAC-903 ,

CANON A-10 Camcorder Battery Fit Models:

Your Deivce is powered by a rechargeable canon camcorder battery.The full performance of a new a-10 battery is achieved only after two or three complete charge and discharge cycles.The battery for canon a-10 camcorder can be charged and discharged hundreds of times,but it will eventually wear out.When the standby times are noticeably shorter than normal,replace the a-10 battery pack.

If a replacement a-10 battery is being used for the first time or if the A-10 Camcorder Batteries A-2 Camcorder Battery E-06 Camcorder Battery has not been used for a prolonged period.it may be necessary to connect the charger and then disconnect and reconnect it to start the charging. Unplug the charger from the electrical plug and the device when not in use.Do not leave fully charged the battery connected to a charger,since overcharging may shorten its lifetime.If left unused,a fully charged canon a-10 battery will lose its charge over time.